Outland Technology UWS-3310 User Manual

OUTLAND TECHNOLOGY INC.
38190 Commercial Court
Slidell, Louisiana U.S.A. 70458
Ph.(985)847-1104, Fax 1106
Email: sales@outlandtech.com
Website: www.outlandtech.com
UWS-3310/3320
OPERATING INSTRUCTIONS
1. To operate Camera System, all interconnections from the Control
Unit, DVR & Monitor, should already be connected but in the
event there is a problem drawing # 0010550 shows how those
items connect.
CAUTION:
Insure voltage does not exceed 250 volts AC to
the Console. Also power source must be properly
grounded. Typically 110 VAC to 250 VAC.
2. Plug Camera Umbilical into Camera and light (Be sure to use a
good quality silicon grease for lubrication). Plug topside
end of umbilical into Control Unit connector on front panel.
3. After verifying supply power is correct, insure camera, light
switches are in off position. Plug into power source.
4. Turn Monitor, Recorder and Camera switches on. A picture should
appear within a few secs.
5. Insure "Light Intensity" is at "Min" position. Turn light
switch on. Turn control up to test light. Turn back to Min.
and Turn switch off.
CAUTION:
" Light can be operated out of water but will shut
down automatically if the temperature exceeds 50c.
6. The CON-3300 console only outputs 24 VDC maximum.

Outland Technology UWS-3310 Specifications

General

Light Source	LED
Weight in Air	4.5kg
Power Supply	12V DC
Depth Rating	1, 000 feet (305 meters)
Operating Depth	1, 000 feet (305 meters)

Summary

UWS-3310/3320 Operating Instructions

Outland HD Mini DVR Instructions

Initial Setup

Provides initial setup steps for the DVR system.

DVR Setup

Details on configuring the DVR's time and date settings.

Recording and Playback

Procedures for recording video and playback on DVR or computer.

LED Light Components

UWL-401 Underwater Light Operation and Maintenance

Installation and Operation

Guide to installing and operating the UWL-401 underwater light.

12" TFT-LCD Monitor User's Manual

Monitor Introduction and Features

Product Description

Description of the 288 video series LCD monitor's capabilities.

Product Features

Highlights key features like brightness, contrast, and mounting.

Usage and Maintenance

Guidelines for package contents, cleaning, and general warnings.

Monitor Control Functions

Function Selection

How to select and navigate monitor functions via OSD menu.

Function Adjustments

Adjusting monitor settings like signal input and volume levels.

Monitor Installation and Display Modes

Installation

Step-by-step guide for installing the LCD monitor.

Display Modes

Details on micro-controller and factory preset display modes.

Signal Connectors and Power Saving

Signal Connector Pin-Outs

Information on the pin configuration for monitor signal connectors.

Power Saving Features

Explanation of the monitor's power saving modes and operation.

Product Specifications

288V Series Product Specifications

Comprehensive technical specifications for the 288V series monitor.

Windows Setup for Monitor

Troubleshooting Common Issues