Need help?Do you have a question about the Outrage Velocity 90 and is the answer not in the manual?
Instructions to read before assembling the helicopter.
Explains caution, warning, and forbidden symbols used in the manual.
Emphasizes safety and responsibility when operating the helicopter.
General safety guidelines and precautions for flying the helicopter.
Recommended mechanical settings for beginner pilots.
Recommended mechanical settings for intermediate pilots.
Recommended mechanical settings for advanced pilots.
Instructions on how to tune the helicopter head for optimal performance.
Explains different seesaw configurations for flight response.
Explains different lower mixing arm configurations for flight.
Shows wiring for Futaba/Hitec 7-channel receivers.
Shows wiring for JR 7-channel receivers.
Details servo positioning for Futaba/Hitec transmitters.
Details servo positioning for JR/Spektrum transmitters.
Guide for setting up gyro and tail neutral position for optimal performance.
Recommended throttle and pitch settings for general flying.
Recommended throttle and pitch settings for 3D flying.
Step-by-step guide for practicing throttle control.
Guide for practicing aileron and elevator control.
Guide for practicing yaw control with the rudder stick.
Techniques for practicing precise hovering.
How to change helicopter orientation during hover.
Guide for adjusting yaw, elevator, and aileron trims for stable flight.
Addresses issues with rotor blade tracking and provides fixes.
Solves problems related to main rotor speed during hovering.
Addresses tail rotor movement and stability issues.
To Next Page
General