Need help?Do you have a question about the Outsunny 84C-120 and is the answer not in the manual?
General| Brand | Outsunny |
|---|---|
| Model | 84C-120 |
| Category | Outdoor Furnishing |
| Language | English |
Keep flames and heat sources away from the shelter fabric. Fabric meets CPAI-84 specs but is not fireproof.
This is a temporary structure not meant for stormy weather, high winds, or heavy rain.
Not for commercial use. Warranty excludes acts of nature or customer abuse. Proof of purchase is required.
Lay out and identify all parts. Assembly is recommended with 4 or more people.
Easily open the sun shelter in six directions until partially extended.
Attach leg covers to each leg and connect the main shelter to the smaller one using velcro.
Secure each leg by sliding the spring buckle upwards until it locks into place.
Carefully fold the eaves and extend the inner poles until the spring ball is fixed.
Step on leg bases, adjust canopy height, and hook leg fabric to inner poles.
Hang the netting around the cross bar using velcro, between the canopy leg and leg fabric.
Insert stakes into leg bases and tie support ropes to canopy rings and ground stakes.
Remove the canopy when not in use to prevent damage during frame folding.
To Next Page