EasyManua.ls Logo

Outsunny 84C-204 - User Manual

Outsunny 84C-204
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
84C-204
ASSEMBLY INSTRUCTION
READ AND SAVE THIS INSTRUCTION FOR FUTURE USE
INbdb002_GL
Question and Answer IconNeed help?

Do you have a question about the Outsunny 84C-204 and is the answer not in the manual?

Summary

Outsunny Gazebo Assembly Guide

Required Tools for Assembly

Lists the essential tools needed to assemble the gazebo.

Step 1: Assemble Base Poles

Connect upright poles to the base plates.

Step 2: Attach Horizontal Beams

Join horizontal beams to the upright poles.

Step 3: Install Mid-Level Beams

Add intermediate beams to the frame structure.

Step 4: Secure Main Frame

Finalize connections for the main gazebo frame.

Step 5: Mount Top Beams

Install the top horizontal beams of the roof structure.

Step 6: Attach Corner Brackets

Secure corner brackets to the roof supports.

Step 7: Connect Roof Support Beams

Install the primary roof support beams.

Step 8: Add Secondary Roof Supports

Install the secondary roof support beams.

Step 9: Install Central Roof Piece

Attach the central component of the roof.

Step 10: Connect Roof Panels

Install roof panels, ensuring consistent direction.

Step 11: Fasten Roof Panels

Secure the roof panels in place.

Step 12: Place Roof Slats

Position the roof slats onto the structure.

Step 13: Attach Roof Supports

Install additional supports for the roof.

Step 14: Secure Roof Edges

Fasten the outer edges of the roof assembly.

Step 15: Iron Plate Distribution

Schematic diagram for iron plate placement.

Step 16: Assemble Roof Plates (Part 1)

Connect roof plates, ensuring correct orientation.

Step 17: Assemble Roof Plates (Part 2)

Install roof plates, preventing potential water leaks.

Step 18: Finalize Roof Fastening

Secure the entire roof structure with fasteners.

Step 19: Install Curtains and Hooks

Attach curtains and associated iron hooks.

Step 20: Final Curtain and Base Fixings

Complete curtain installation and secure the base.

Summary

Outsunny Gazebo Assembly Guide

Required Tools for Assembly

Lists the essential tools needed to assemble the gazebo.

Step 1: Assemble Base Poles

Connect upright poles to the base plates.

Step 2: Attach Horizontal Beams

Join horizontal beams to the upright poles.

Step 3: Install Mid-Level Beams

Add intermediate beams to the frame structure.

Step 4: Secure Main Frame

Finalize connections for the main gazebo frame.

Step 5: Mount Top Beams

Install the top horizontal beams of the roof structure.

Step 6: Attach Corner Brackets

Secure corner brackets to the roof supports.

Step 7: Connect Roof Support Beams

Install the primary roof support beams.

Step 8: Add Secondary Roof Supports

Install the secondary roof support beams.

Step 9: Install Central Roof Piece

Attach the central component of the roof.

Step 10: Connect Roof Panels

Install roof panels, ensuring consistent direction.

Step 11: Fasten Roof Panels

Secure the roof panels in place.

Step 12: Place Roof Slats

Position the roof slats onto the structure.

Step 13: Attach Roof Supports

Install additional supports for the roof.

Step 14: Secure Roof Edges

Fasten the outer edges of the roof assembly.

Step 15: Iron Plate Distribution

Schematic diagram for iron plate placement.

Step 16: Assemble Roof Plates (Part 1)

Connect roof plates, ensuring correct orientation.

Step 17: Assemble Roof Plates (Part 2)

Install roof plates, preventing potential water leaks.

Step 18: Finalize Roof Fastening

Secure the entire roof structure with fasteners.

Step 19: Install Curtains and Hooks

Attach curtains and associated iron hooks.

Step 20: Final Curtain and Base Fixings

Complete curtain installation and secure the base.

Outsunny 84C-204 Specifications

General IconGeneral
TypeGazebo
Eaves Height6.5'
MaterialSteel, Polyester Fabric
StyleModern
Assembly RequiredYes
Overall Dimension9.8' L x 9.8' W x 8.7' H
Top Height8.7'
Dimensions9.8' L x 9.8' W x 8.7' H

Related product manuals