Need help?Do you have a question about the Outsunny 84C-095 and is the answer not in the manual?
General| Type | Gazebo |
|---|---|
| Frame Material | Steel |
| Canopy Material | Polyester |
| Shape | Square |
| UV Protection | Yes |
| Water Resistance | Yes |
| Assembly Required | Yes |
| Eaves Height | 6.5 ft. |
| Dimensions | 10 ft. x 10 ft. |
| Material | Steel, Polyester |
Lists the necessary tools for assembling the product.
Contains crucial safety warnings and precautions for product assembly and use.
First step of assembly, connecting uprights with base components.
Second step, connecting horizontal beams to form the upper frame.
Steps three and four focus on reinforcing the main gazebo frame structure.
Fifth step, installing beams onto the main uprights and tightening connections.
Sixth step, attaching corner brackets and support elements to the frame.
Seventh step, installing diagonal roof support beams.
Eighth step, connecting roof support members to the frame.
Ninth step, attaching the central piece for the roof structure.
Tenth step, installing the primary roof panel sections.
Eleventh step, attaching the triangular sections of the roof.
Schematic diagram showing the distribution of iron plates on roof panels.
Thirteenth step, connecting roof panels to the main gazebo frame.
Fourteenth step, securing roof panels with specific fasteners to prevent water leaks.
Fifteenth step, completing the fastening of all roof panels.
Sixteenth step, installing decorative and structural corner pieces on the roof.
Seventeenth step, attaching the mesh curtain panels to the frame.
Eighteenth and final step, securing the structure with ground stakes.
To Next Page
