How To Assemble Your V8 fatbike?
V8 electric bike assembly includes just a few super easy steps. It always helpful to find and read the
owner’s manual.
#1 Insert Front Wheel
Install disc brake on the front wheel; Insert the skewer through the front wheel axle from the side of
brake disc, secure it with the 12-14 wrenches.
Note: 1. Place small parts on the axle according to the sequence in picture; 2. Inflate tires to
recommended PSI. (Marked on the tire).
#2 Install Pedals & Fender
Insert the pedal ( L for Left; R for Right ) into its position, and tighten them with the 13-15 wrench;
Install front fender with M5 Allen wrench and socket wrench to secure it.
To Next Page
Loading...