#3 Attach Handlebar
Loose the trim cover with M5 Allen wrench, install the handle holder, there should be no gaps or
shakes before really attaching the handlebar. Secure your handlebar and adjust the handlebar & fork
to fit your riding position.
Go Ride!
Press and hold the M button on the controller until the display appears and you’re ready to hit the
road!
If you’re still feeling out of your depth or like you may physically need a hand, contact a local bike
shop or email to support@ouxibike.com.
Advice Before Test Riding OUXI V8 Bike
1. Check all control cables, throttle cable must not binding in any steering position.
2. Fully charge your battery before the first ride, it usually takes 5-7 hours to fully charge your
V8 electric bicycle.
3. Adjust the brake caliper slightly if you feel the disc brake rub on the rotor.
To Next Page
Loading...