EasyManua.ls Logo

OVA AIS-SART S9000 User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
S9000
AIS-SART
User Manual
WarningAIS-SART is an emergency radiolocation signal transmitter.
It could only be operated in the case of life-threatening.
WarningAIS-SART transmits a low-level RF signaland after activation, it couldn't
be covered by anything within the antenna area.
CautionFalse alarms are life-threatening and will cause damage to search and
rescue operations.
Abuse of AIS-SART may result in the penalty.
CautionIf the shield is damaged, AIS-SART couldn't comply with SOLAS
regulations and should be repaired or replaced.
CautionDo not disassemble AIS-SART by yourself.
CautionLithium-ion battery inside the product, do not burn, pierce, make it deform
or charge it.
CautionDispose discarded AIS-SART in accordance with local waste disposal
regulations.
CautionDo not use chemical solvents to clean the AIS-SARTwhich could easily
corrode its enclosure.
Copyright: © NANTONG SAIYANG ELECTRONICS CO,. LTD. 2013
Ownership Details
Vessel Name
Owner Details
Unique ID
9
7
0
Question and Answer IconNeed help?

Do you have a question about the OVA AIS-SART S9000 and is the answer not in the manual?

OVA AIS-SART S9000 Specifications

General IconGeneral
BrandOVA
ModelAIS-SART S9000
CategorySecurity System
LanguageEnglish

Summary

AIS-SART Safety and Precautions

Emergency Use Warning

AIS-SART is an emergency radiolocation signal transmitter for life-threatening situations only.

False Alarm Caution

False alarms are life-threatening and will cause damage to search and rescue operations.

Damaged Shield Caution

A damaged shield means AIS-SART cannot comply with SOLAS regulations and needs repair or replacement.

Self-Disassembly Caution

Do not disassemble AIS-SART by yourself.

Battery Handling Caution

Do not burn, pierce, deform, or charge the lithium-ion battery.

Activate and Test AIS-SART

Device Activation and Deactivation

AIS-SART Activation Steps

Details pulling the protective cover, pressing the ON button, and LED indications during activation.

Battery Information and Replacement