SAFETY NOTICE
USAGE GUIDELINES
PLEASE FOLLOW THE FOLLOWING GUIDELINES
Do not leave the toilet
exposed to the sun.
Color fading and
yellowing may result.
Radio or transmitting
devices may interfere
with the toilet's remote
control functions.
If the power cut off during washing
and the nozzle is still out: Do not
push it back manually, it will revert to
its resting position once the power is
back ON.
If power cuts off during nozzle self-clean-
ing, the water will continue to flow out.
Manually close the inlet water valve of the
toilet until power comes back ON.
To prevent against
power surge damages,
make sure the ground is
working in the power
socket.
If you do not plan to use the toilet
for a long time, close the inlet
water valve and unplug the toilet.
Do not use DC current. Only AC
110V with load capacity over
1500W are accepted.
Do not expose the toilet to freezing
temperature. This will void the warranty
and damage the piping.
Do not use direct
current. Only use
alternative current.
02
To Next Page
Loading...
