Overade OxiBrake - OxiBrake Pairing Management; Deleting All Pairings; Multi-Pairing Procedure

[B] – DELETING ALL PAIRINGS ON OXIBRAKE
[C] - MULTI-PAIRING
To pair a second light to your OxiBrake, repeat procedure [A].
Switch on OxiBrake by pressing
the button
Press and hold the button
(about
6s) until OxiBrake flashes
red&green (pairing mode)
Press the button 3 times quickly
(within 4s)
1
2
3
EN
1
2 3
=> If pairings are
correctly deleted:
- OxiBrake is quickly
flashing in green
Dec. 2022 OxiBrake Guide 9