Do you have a question about the Overland Vehicle Systems Nomadic and is the answer not in the manual?
Unpack tent, undo Velcro straps, locate mounting holes, and remove internal contents.
Ideal for narrow spaces, maintains rear vehicle access for trunk or tailgate.
Allows accessory installation, fits vehicle width, typically avoids track cutting.
Ensure roof rack load capacity, recommend four people for lifting to prevent injury.
Position tent on rack, align tracks, slide bolts and sliders, secure with nuts.
Ensure bolts are tightened, insert rubber end caps into mounting tracks.
Uncompress ladder, position tent, and unfold by pulling ladder away from the vehicle.
Pull ladder to unfold tent, ensure ladder touches ground when fully open.
Install support bows into brackets and window rods into tent slits for structure.
Slide annex into sail track, zip to tent base, and secure to the ground with pegs.
Inspect hardware, clean with mild detergent, and lubricate threads for optimal performance.
Clean with mild detergent, dry thoroughly, and protect fabric from UV damage with repellent spray.
Treat affected fabric with Lysol and lemon juice/salt solutions to inhibit growth.
Handle zippers gently, keep clean and lubricated. Wipe ladder rails with silicone spray.
Keep mattress dry. Avoid prolonged UV exposure to prolong fabric life and coatings.
Covers material/workmanship defects, excludes normal wear, abuse, and accidents.
Return product freight prepaid for inspection; paid repairs are available for non-warranty issues.
| Tent Type | Rooftop Tent |
|---|---|
| Base | Aluminum |
| Setup Time | 5-10 minutes |
| Body Fabric | Polyester |
| Rainfly Fabric | Polyester |
| Mattress | High-Density Foam |
| Ladder | Aluminum |
| Travel Cover | PVC |
| Material | Polyester, Aluminum, PVC |
| Water Resistance | 2000mm |
| Ventilation | Mesh Windows and Vents |
| Color Options | Gray |
| Packed Size | 56" x 48" x 12" |
Loading...