Overmax X-Blast - Controller Description; How to Charge Battery

EN
4. Car
5. 4 x Clasp, 2 x Nut
The power adapter is not supplied. Use the power supply of the following parameters:
Input: 100-240V~50/60Hz, Max 0.2A
Output: 5V 1A
2. Description of controller (see fig. 2):
1. Forward
2. Brake/Reverse
3. Control knob
4. Wheel turn adjustment
5. Reversed direction of control knob operation
6. On/o switch
7. Reversed direction of throttling valve operation
8. Power/connection LED
9. Toe-in adjustment
10. Acceleration adjustment
Opis części samochodu:
1. On/o switch
2. Motor
3. Battery connector
3. How to charge battery (see fig. 10):
Charge the battery before use.
• Switch the car o.
• Disconnect the battery from the car before charging.
• Connect the battery plug to USB cable.
• Connect USB cable to PC or USB adapter.
• Charging takes about 150 minutes. A green light on the charger suggests
the battery is connected.
• Disconnect the battery from charger and insert it in the car.