EN
• To change the wheel turning angle, turn the wheels turning adjustment
knob (1) to the right to increase the angle, or to the left (2) to reduce the
angle. If you set the knob in „0” position, the car will not turn (see fig. 8).
• To adjust the speed, turn the throttling valve adjustment to the right (1)
and the maximum speed will be increased. Turn it left (2) to reduce the
maximum speed (see fig. 9).
8. How to clean and maintain
• Before you start cleaning, switch the device o and remove battery.
• Apply oil on all moving parts.
• Clean the car and controller with a wet cloth.
• Do not use chemicals to clean the device.
•
After every use, remove sand and dust from the car. Make sure all
elements of the car are always dry.
• Remove the battery from the controller when you do not use it.
The pictures are for reference only. The real design of products may dier from
the pictures presented.
To Next Page
Loading...
