EasyManua.ls Logo

Overmax X-Strike - Steering Controller; Troubleshooting

Overmax X-Strike
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
STEERING CONTROLLER
Use the steering controller to adjust the front wheel alignment (fig. 9). This
adjustment should be made so that the front wheels are not in contact with
the ground.
TROUBLESHOOTING
Problem Cause Solution
The car does not
connect to the
controller / no
control.
Low battery. Charge the car battery.
Replace the batteries in
the controller.
Too much distance. Make sure the car and the
controller are not too far
apart.
Inability to drive
straight/reverse or
turn right/left.
Low battery charge. Charge the rechargeable
battery (see: Charging the
car battery).
There was a short
circuit as a result of
being submerged in
water.
Leave the car to dry
completely.
Incorrectly
connected wires.
Make sure the cables are
connected correctly.
The rechargeable
battery does not
charge.
The output voltage
of the charger is too
high.
Ensure that the electrical
parameters indicated on
the device label match the
electrical parameters of
the charger.
The power supply
cable is damaged.
Make sure the power cord
is not damaged or contact
the manufacturer to
replace the cord.

Related product manuals