EasyManuals Logo

OWC Mercury On-The-Go User Manual

OWC Mercury On-The-Go
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Page 3
System Requirements:
Macintosh with FireWire interface and OS 8.6
and above.
PC with FireWire interface and Windows 98 or
other OS with FireWire support
Macintosh with USB interface, either built in or
via 3rd party card. USB 2.0 drivers required for
use with Mac OS X, USB 2.0 not supported on any
other Macintosh OS. Mac OS 8.6 and above for use
with USB 1.1. USB 2.0 is fully backwards compatible
with USB 1.1.
PC with USB interface and Windows 98 or other
OS with USB support. USB 2.0 drivers required
for USB 2.0 use. Check with your OS manufacturer for
the availabilty of USB 2.0 drivers for your system, and
if your USB card supports USB 2.0. USB 2.0 is fully
backwards compatible with USB 1.1.
Macintosh with eSATA PCI Interface card.
eSATA requires Mac OS X 10.2 or later.
Windows system with eSATA PCI Interface,
either built in or via 3rd party PCI eSATA card.
eSATA requires Windows 2000, XP or Vista.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OWC Mercury On-The-Go and is the answer not in the manual?

OWC Mercury On-The-Go Specifications

General IconGeneral
Storage drive size2.5 \
Maximum storage capacity2.2 TB
Number of storage drives supported1
Supported storage drive interfacesSerial ATA
FireWire 800Yes
Product colorTransparent
ChipsetOxford 944, ASMedia 1051e
Data transfer rate5 Gbit/s
Cables includedFireWire, USB
Weight and Dimensions IconWeight and Dimensions
Depth139.7 mm
Width88.9 mm
Height25.4 mm
Weight190 g

Related product manuals