6.4 Sock
The so, washable Sock is used to hold the Sensor to the baby’s foot in just
the right location. The Sock has a location for the Sensor to be inserted. The
hole in the Sock stretches over the Sensor dome. The Sock also has a notch
which should align with the notch in the Sensor. The Sock notch is also used
to properly align the Sock to the pinky toe of the foot. Hook and loop
fastener straps on the Sock are used to secure the Sock to the baby’s foot
To learn more about Sock placement and fit to baby’s foot see Section 8.1,
Sock Size, Fit & Placement.
CAUTION.
If there is more than one baby in the home using dierent
BabySat devices, write the name of the baby on the Sock,
Sensor and Base Station to avoid confusion.
CAUTION.
Always ensure that the Sock with Sensor is placed correctly
on the baby’s foot. Poor Sensor placement may aect
performance.
Notch
Aids in proper Sensor and Sock placement.
Sensor Location
Aids in proper placement of Sensor into Sock.
Sensor Dome Cutout
Cutout for Sensor Dome.
Sock Labeling
Indicates Sock size and correct foot.
Hook and loop fastener straps
Secures the Sock on baby.
15
To Next Page
Loading...