8.8 Switching the Sensor O and On
Owlet recommends placing the Sensor on the Base Station when not in use
to charge the Sensor and to keep it safe. The Sensor should only be shut o
for cleaning and short- or long-term storage.
To power o the Senso
Press settings cog on the Home Screen or press Account then select
the My Owlet Devices
Press “Turn o Sensor”.
The red light in the Sensor will turn o and monitoring will cease.
Turn the Sensor O
The Sensor is turned on when it is removed from the Base Station.
To turn the Sensor on, place it on the Base Station for at least 3 seconds and
then remove it.
37
To Next Page
Loading...