16.3 Alarm Condition Delay (Time from event to alarm condition)
The alarm condition delays are detailed in the following table. Delays vary by alarm type. All noted times include the data processing delay, the data update
delay and transmission time to the Base Station.
Alarm
Alarm Condition Meaning (Alarm Condition)
High Priority
The Oxygen value has dropped below the Low Oxygen
threshold. (LOW OXYGEN)
The Oxygen value has exceeded the
High Oxygen threshold. (HIGH OXYGEN)
Pulse Rate has fallen below the Low Pulse Rate threshold.
(LOW PULSE RATE)
Pulse Rate has exceed the High Pulse
Rate threshold. (HIGH PULSE RATE)
8 seconds1
8 seconds1
8 seconds
8 seconds
Medium Priority
Base Station has lost power.
Sensor is disconnected from the Base Station (range) for
60 seconds. (CONNECTION ISSUE)
The data has not updated for more than
9
0 seconds and there is no movement
OR the data has not updated for more than
4
minutes and there is movement.
(DI
FF
ICULTY GETTING READING)
Sensor has fallen o
the baby.
(CHEC
K
SENSOR PLACEMENT)
1 to
2
seconds
60
+/-
3
seconds
90
+/-
5
seconds
2
(
no movement
4
minutes
+/-
5
seconds
(
escalated movement alarm
60
+/-
3
seconds
54
To Next Page
Loading...