5
1. Measure and mark
Consider which outlet to use. The
outlet should be at least 36 inches
away from the crib to ensure no
exposed cables will be within baby’s
reach. The next steps will instruct you
on how to cover all cables.
Measure 36 inches from the top of
your baby’s mattress and make a
mark on the wall — this is where the
Cam will be mounted. Center this
mark above baby’s crib for the optimal
viewing angle.
36 inches
36 inches
(six cable guards)
It’s also important to consider the
location of the temperature sensor.
The temperature sensor can be found
near the end of the smart cable on
the side that connects to the power
adapter.
To Next Page
Loading...
Need help?
General
