Owlet Cam User Manual

8
The cable guards use high-strength
adhesive. Take your time during
installation to ensure proper placement.
1 Peel off adhesive cover from the
back of a long guard
2 Thread cable down the center
of a long guard
3 Snap long guard onto the
bottom of the mounting plate
4 Press firmly onto wall
5 Repeat steps 1–4 with remaining
long guards until you reach the
height of the wall outlet
7. Mount cable guards
long guard

Owlet Cam Specifications

General

Brand	Owlet
Model	Cam
Category	Monitor
Language	English