Page 1 of 5 REV.240820
USER INFORMATION SHEET
LIDLOCK
Use the following instructions to set your own combination:
Note: Before you begin, the default code ‘0-0-0-0’ should be aligned with the arrow markers found on the
side of the lock.
• Slide the locking sleeve down to ensure the lock opens using the default code.
• Using the included reset tool, push the reset button in (found near the hinge of the lock) until it protrudes
from the other side of the locking sleeve.
• Select a new 4 digit code and return the reset button to it’s original position.
Your new combination is now set.
Locking
sleeve
Open
Reset Tool
Reset Button
To Next Page
General