Instructions for Triple Timer use:
1. Place batteries securely inside battery compartment and
close battery door. Display will show
12:00:00.
2. To set clock, press and hold clock button for 3 seconds.
When hour and minute digits start blinking, enter clock
time in hours and minutes on the number keypad. For
example, to enter
12:30, press 1-2-3-0. Press clock
button again to save time.
3 a. To set the first timer, press T1 timer button. Display will
show all three timers and the first timer will be in
parentheses. Enter desired time in hours, minutes and
seconds on the number keypad. For example, to set
timer for
1 hour and 15 minutes, press 1-1-5-0-0.
Press stop/start button to begin countdown.
To Next Page
Loading...
General