Oxygenics PAW SPA PETJET

To Next Page

EASY INSTALLATION

INSTRUCTIONS

STEP 1

Remove your

existing shower

head. To remove,

turn the existing

shower head in a

counterclockwise

direction.

STEP 2

Remove any

remnants of old

plumber’s tape and

ﬂush out shower

pipe for 5 to 10

seconds.

STEP 3

Wrap plumber’s

tape clockwise 3

or 4 turns around

threaded end of

shower arm.

STEP 4

Screw the 2-Way

Shower Adapter

clockwise onto taped

portion of the shower

arm. Wrap plumber’s

tape 3 turns around

threaded ends of

2-Way Shower

Adapter.

STEP 5

In a clockwise

direction, screw

existing shower

head onto the

taped portion of

the 2-Way Shower

Adapter and hand

tighten.

STEP 6

Attach end of coiled

hose to 2-Way

Shower Adapter and

hand tighten. Attach

PetJet shower to

other end of coiled

hose and hand

tighten.

PetJet

STOP!

NEED HELP?

PLEASE DO NOT RETURN THIS

PRODUCT TO THE STORE.

If you need installation assistance, replacement

parts or have questions regarding our warranty

please contact customer service at

1.866.440.9257

or 1.775.420.5600

Support is also available via email at

support@oxygenics.com

Be sure to visit our website at

www.oxygenics.com

Business Hours:

Monday-Thursday 7:00 am to 5:00 pm PST

Friday 7:00 am to 4:30 pm PST

EASY TWIST

SPRAY

SELECTION

Using multiple spray patterns

during your pet’s shower has

never been easier. With the

PetJet’s easy twist design, simply

rotate the easy spray selector for

a quick spray change.

ATTENTION: CHECK WATER TEMPERATURE AND

ADJUST AS NEEDED BEFORE WASHING YOUR PET.

USING THE FLOW

CONTROL

Located on

the back of

the PetJet

shower

head, the

flow control lever eliminates sudden

blasts of water to make your pet feel

comfortable and secure.

NOTE: The flow control lever is not

a shut off valve. When turned to the

lowest position, the shower head

continues to flow. This is a normal

safety feature. Unit may be in lowest

flow (gentle stream) position during

shipping. Please check the position

of ﬂow control lever upon installation.

HigH

MediuM

Low

USING THE 2-WAY SHOWER ADAPTER

To change the shower spray: Place your index

ﬁnger on one lever and your thumb on the other

lever and rotate either clockwise or counter

clockwise (depending on the current position)

until you feel it click into place.

For use with automatic

compensating valves

rated at 1.88 GPM

(7.10 L/min) or less.

Need help?

Do you have a question about the Oxygenics PAW SPA PETJET and is the answer not in the manual?

Summary

Easy Installation Instructions

Step 1: Remove Existing Shower Head

Remove your existing shower head by turning it counterclockwise.

Step 2: Prepare Shower Pipe

Remove old plumber's tape and flush the shower pipe for 5-10 seconds.

Step 3: Apply Plumbers Tape

Wrap plumber's tape clockwise 3-4 turns around the threaded shower arm.

Step 4: Install 2-Way Shower Adapter

Screw the 2-Way Shower Adapter clockwise onto the taped shower arm.

Step 5: Reattach Shower Head

Screw the existing shower head clockwise onto the adapter and hand tighten.

Step 6: Connect Hose and PetJet

Attach the coiled hose to the adapter and the PetJet shower head.

Using the 2-Way Shower Adapter

Spray Selection Adjustment

Rotate the lever clockwise or counterclockwise to change the shower spray pattern.

Easy Twist Spray Selection

Multiple Spray Pattern Use

Rotate the easy spray selector for quick and simple spray changes during use.

Using the Flow Control

Flow Control Lever Functionality

The lever eliminates sudden water blasts for pet comfort; it is not a shut-off valve.

Using the Sink Adapter

For Male Threaded Faucets

Steps for installing the sink adapter on male threaded faucets.

For Female Threaded Faucets

Steps for installing the sink adapter on female threaded faucets.

Using the Outdoor Spigot Adapter

Spigot Adapter Installation

Steps to attach the outdoor spigot adapter to a spigot or garden hose.