Ozark Trail WMT-9920N - User Manual

Verify package contents by emptying bags and confirming all parts are included and undamaged.

Select a site, spread tent, extend poles, insert through sleeves, and attach clips.

Extend rainfly pole, insert into pockets, drape over tent, and attach s-hooks.

Drive stakes through pin-rings at the base of the tent to secure it.

Attach gear loft to fabric loops inside tent ceiling for extra storage.

Carefully remove stakes by pulling out hook ends and storing them.

Detach gear loft by unhooking s-hooks from fabric loops and folding it.

Detach s-hooks and fasteners, and remove the rainfly pole.

Unfasten clips, remove poles from pin-rings, and slide poles out of sleeves.

Fold tent into a rectangle, roll tightly with pole bag to squeeze out air, store.

Assemble and use product safely, pay attention to safety symbols for hazards and tips.

Caused by temperature differences; avoid touching walls, leave doors/windows open.

Avoid storing wet; clean with mild soap, dry in sun, apply seam sealer.

Use self-adhesive patch kit for small tears; recommend repair shop for larger ones.

Rework zipper by moving slider to beginning of tape if it separates.

Use a ground cloth slightly smaller than the tent floor to prevent condensation.