Ozdoken VPHE - Page 34

QUICK SETTING TABLE
OVERFLOW PLATES
C1 plate should be fixed to hole no. “1”
We recommend, to set your machine to the following values for Sugar beet seeds.
COATED SUGAR BEET SEED
A SELECTOR SETTING
SELECTORS (SEED SINGULATORS)
Outer selector handle should be fixed to hole
no. “9” or “10”
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “4”
SEEDING DISC
• Ø2.1 mm hole diameter
• With round mixers
• Preferably 36 holes
34