Ozdoken VPHE - Page 36

QUICK SETTING TABLE
B SELECTOR SETTING
Inner selector handle should be fixed
to hole no. “3” or “4”
A SELECTOR SETTING
SELECTORS (SEED SINGULATORS)
Outer selector handle should be fixed to hole
no. “7” or “8”
OVERFLOW PLATES
C1 plate should be fixed to hole no. “1”
We recommend, to set your machine to the following values for Sugar beet seeds.
UNCOATED SUGAR BEET SEED
SEEDING DISC
• Ø1.7 mm hole diameter
• With round mixers
• Preferably 36 holes
36