QUICK SETTING TABLE
OVERFLOW PLATES
C1 Plate should be fixed to hole No. “1”
SEEDING DISC
• Ø3.5 mm or Ø4 mm hole diameter
• Nail mixer
• Preferably “20” or “26” holes
We recommend, to set your machine to the following values for Corn seeds.
CORN SEED (Small Size / Popcorn Size)
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to hole
no. “10” or “11”
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “4” or “5”
44
To Next Page
Loading...