QUICK SETTING TABLE
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “7”
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to
hole no. “12”
C1 plate should be fixed to hole no. “2”
OVERFLOW PLATES
We recommend, to set your machine to the following values for Bean seeds.
BEANS SEED
(Normal Size 10 mm – 11 mm)
SEEDING DISC
• Ø4.5mm or Ø5mm hole diameter
• Nail mixers
• Preferably “26” holes
46
To Next Page
Loading...