QUICK SETTING TABLE
OVERFLOW PLATES
C1 plate should be fixed to hole no. “2”
Note: Plate can be inserted to hole no. “3”
if the seed size is bigger.
SEEDING DISC
• Ø3.5mm hole diameter
• Nail mixers
• Preferably “72” holes
SOYBEAN SEEDS
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to hole
no. “10” or “11”
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “4” or “5”
We recommend, to set your machine to the following values for Soybean seeds.
56
To Next Page
Loading...