APPLYING THE CUFF AND POSITIONING
1514
PROGRAMMING THE UNIT (CONTINUATION)
8. After the unit has been set it will
display the picture at right and
then turn off automatically.
9. To restart the programming again, press and hold the "SET”
button for 3 seconds and continue with step 1.
4. Press “SET” to confirm the [HOUR]. The proceed to
program the [MINUTE].
5. Repeat Step 3 and 4 to
confirm the [MINUTE].
6. Repeat Step 3
and 4 to confirm
[MONTH], [DAY]
and [YEAR].
7. Repeat Step 3 and 4
to confirm the [UNIT].
Correct Measurement Position
In order to get an accurate reading, sit upright in a chair and rest your left
elbow on the table. If needed use a cushion, pillow or your other wrist for
support. Keep your palm facing up and make sure the monitor is at heart
level. Take a few deep breaths and relax your body, especially between
your elbow and fingers.
Your fingers should be relaxed and in a natural resting position:
Wrist should also be relaxed and in a natural resting position:
To Next Page
Loading...
Need help?
General
