Ozito EPP-750 User Manual

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: guide bar, chain and included accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
TELESCOPIC
POLE PRUNER
750W 200MM (8”)
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 750W
Chain Speed: 11 meters/second
No Load Speed: 6,000/min
Max Cutting Width: 180mm
Guide Bar Length: 200mm (8”)
Oil Tank Capacity: 60ml
Telescopic Range: 1.85 – 2.80m
Weight: 3.82kg
EPP-750
WHAT’S IN THE BOX
WARRANTY
ozito.com.au
0817
Shoulder Strap
Telescopic Pole Pruner
Chain
Guide Bar
Guide Bar Cover
50
50
Additional Handle

Ozito EPP-750 Specifications

General

Brand	Ozito
Model	EPP-750
Category	Pole Saw
Language	English

Summary

Product Details and Warranty

Product Specifications

Lists key technical specifications including power, chain speed, and dimensions.

What's in the Box

Details all the components and accessories included with the pole pruner.

3 Year Replacement Warranty

Outlines the terms and conditions for the product's 3-year replacement warranty.

Customer Service Helpline

Provides contact numbers for warranty claims and product support inquiries.

Know Your Product and Setup

Product Component Identification

Identifies and labels the main parts and components of the telescopic pole pruner.

Setup and Preparation

Guidance on preparing the tool for use, including fitting the guide bar and chain.

Tensioning the Chain

Instructions on how to properly adjust and maintain chain tension for safe operation.

Saw Chain Lubrication

Details the process for lubricating the chain and bar, and the importance of oil.

Assembly and Adjustments

Handle and Cord Retainer

Instructions for fitting the additional handle and using the extension cord retainer.

Adjusting the Telescope Length

Steps to unlock, adjust, and lock the telescopic shaft for desired reach.

Attaching the Shoulder Strap

Guidance on wearing and attaching the shoulder strap for comfortable use.

Additional Handle Adjustment

Instructions for loosening, sliding, and retightening the additional handle.

Operation and Safety

Pre-Operation Checks

Ensures the pole pruner is in safe working condition before each use.

Switching On and Off

Step-by-step guide on how to safely start and stop the pole pruner.

Bucking Spikes Function

Explains the role of bucking spikes in cutting and preventing kickback.

General Power Tool Safety Warnings

Crucial safety precautions for operating power tools to prevent injury.

Applications and Techniques

Limbing Process

Describes the process of removing branches from a fallen tree.

Pruning a Standing Tree

Guidance on safely removing limbs or branches from a standing tree.

Sawing Techniques

Illustrates proper techniques for cutting branches to ensure safety and efficiency.

Kickback Prevention

Details how to avoid kickback, a dangerous reaction when cutting.

Maintenance and Safety Symbols

Chain Sharpening

Instructions for sharpening the chain to maintain optimal performance.

Guide Bar Wear

Advice on reversing and maintaining the guide bar for uniform wear.

Power Cord Replacement

Information on replacing the power cord by qualified personnel.

Description of Symbols

Explains the meaning of various symbols used throughout the manual.