To Next PageTo Next PageWhy is my Ozito PXLTS-180 not starting?
Your Ozito Trimmer might not be starting due to a few reasons. First, the cutter head may be clogged with grass; try cleaning it. Second, the battery may be low, so ensure it is charged. Lastly, check if the battery is correctly inserted into the trimmer.
How to prevent grass from wrapping around the shaft and trimmer head of my Ozito PXLTS-180 Trimmer?
To prevent grass from wrapping around the shaft and trimmer head of your Ozito Trimmer, especially when cutting tall grass, make several passes from the top down instead of cutting at ground level.
What to do if Ozito Trimmer motor stops while operating?
If the motor of your Ozito Trimmer stops while you're using it, the battery likely has no power. Try charging the battery to resolve this issue.
Why is my Ozito Trimmer not operating at full capacity?
There are a couple of reasons why your Ozito Trimmer might not be operating at full capacity. It could be clogged, so clean the cutter head of any grass. Also, if you're cutting tall grass at ground level, try making several passes from top down.
General| Line Diameter | 1.6 mm |
|---|---|
| Feed Type | Bump Feed |
| Voltage | 18V |
| Power Source | Battery |
| Cutting Width | 250mm |
Details the 5-year replacement warranty for DIY use, excluding consumable parts.
Information about battery and charger compatibility with the Ozito Power X Change range.
Instructions for assembling the line trimmer, including fitting the safety guard.
Steps to adjust the additional handle for user comfort and control.
Guide on extending or retracting the telescopic shaft for optimal working height.
Instructions on how to adjust the tilting angle of the trimmer head.
How to extend the edging guide for precise trimming near obstacles.
Steps to rotate the trimmer head for edging and trimming tasks.
Procedures for inserting and removing the battery pack from the tool.
Explanation of the tool's controls, including switching on/off.
Guidelines for effective trimming techniques, including angle and approach.
Instructions for using the edging guide for precise edge trimming along paths.
Steps for replacing the spool and clearing tangled line issues.
Instructions on how to wind new cutting line onto the spool.
Advice on cleaning the tool and proper storage procedures.
Safety precautions specific to battery packs, including handling and storage.
Safety instructions for using the battery charger, including connections and maintenance.
Step-by-step guide for charging the lithium-ion battery for optimal performance.
Explanation of the battery charge indicator LEDs and their meanings.
Information on the tool's battery protection system for longevity.
Details the 36-month replacement warranty for DIY use, excluding consumable parts.
Table explaining the status of charger LED indicators during charging.
Instructions for wall mounting the battery charging unit.
