Speakers
Driver unit: 9mm speaker
Impedance: 16±15%Ω
Sensitivity: 95dB (1mW at 1KHZ)
Rated Power: 1mW
Power Handing: 10mW
Frequency Response: 10HZ-20000HZ
Cord Length: 1.2M
Plug: 3.5mm (4PIN)
3.5mm jack.
Microphone
Type: Interference microphone
Chips with silk 6C
Sensitivity: - 35 ± 2dB
Operating voltage: 2V
Operating current: 0.25 ~ 0.4mA, 2.2KΩ
Microphone: 10P capacitor and 330Ω resistor
TECH SPECS
1. Earphone with mic + PTT (push to talk)
function with 3.5mm/ 4pin jack.
2. Three pairs of EQ FX tips. Bass & mid as
spare and high pitch on earphone.
3. Three pairs of ear tips. Big & small as
spare and middle size on earphone.
4. Adapter cable for PC (10cm) with two
3.5mm jack.
5. Protection case.
6. Quick guide.
BOX CONTENT
To Next Page
Loading...
