OZtrail ELE-FF080D-G - Operating with 240 V AC

7
DC Power Cable
(Can be Cigarette connection or Merit connection by
removing/replacing red twist cap (Fig.4))
OPERATING YOUR FRIDGE/FREEZER
OPERATING WITH 240V AC
• Plug the 240V AC power adaptor & cable
into the Fridge power socket (Fig. 3) on the
end of the Fridge/Freezer and then connect
to a suitable 240V AC power source.
• The Fridge/Freezer will automatically turn
on, there is no requirement to switch the
appliance on.
• The display will automatically show the
current internal cabinet temperature.
• The Fridge/Freezer is equipped with a
multivoltage internal power supply with
priority circuit or connecting to an AC
voltage power source of 240V.
CAUTION: Do not touch cables, plugs or
switches with wet hands or when your feet
are in contact with water! If you operate your
Fridge/Freezer on board a boat by means of
a shore connection to a 220-240V AC power
source, the power connection must include an
earth leakage RCD residual current device.
Fig. 3
Fig. 4
AC Power Adaptor