To Next PageTo Next Page
Need help?Do you have a question about the P.LEMMENS TAC5 and is the answer not in the manual?
Details the unit's mono-structured design, materials, insulation, and acoustic properties.
Explains the unit's TAC centrifugal ventilators and essential electrical supply requirements.
Focuses on protecting the heat exchanger via filter checks and frost prevention methods.
Covers filter types, identification for replacement, and their role in unit protection.
Advises filling the datasheet for maintenance, manufacturer communication, and warranty.
Outlines the manufacturer's warranty terms, duration, limitations, and conditions for voiding it.
States compliance with CE standards and Eco design directives, referencing website for details.
Provides step-by-step instructions for mounting the unit, including access, wall fixation, and alignment.
Details the connection of the condensate drain pipe, noting the included pump.
Provides general guidance and schematics for the Class Unit's electrical connections.
Illustrates the internal components and their arrangement within the Class Unit.
Shows the placement and color coding of temperature sensors within the unit for identification.
Specifies wiring requirements for power supply, heating coil, including voltage, capacity, and protection.
Manages fan airflow, time slots, bypass, heat exchanger, dampers, and heaters for optimal operation.
Details various communication methods for the TAC5 control system, including RC, GRC, MODBUS, and KNX.
Outlines 3-monthly maintenance checks, including alarms, filter clogging, and internal unit cleaning.
Details 12-monthly maintenance tasks, including fan checks, unit airtightness, and bypass cleaning.
Section for recording working modes, airflow settings, pressure alarms, and heating output parameters.
Area to log supply/exhaust airflow and pressure values displayed during unit operation.
Details the unit's mono-structured design, materials, insulation, and acoustic properties.
Explains the unit's TAC centrifugal ventilators and essential electrical supply requirements.
Focuses on protecting the heat exchanger via filter checks and frost prevention methods.
Covers filter types, identification for replacement, and their role in unit protection.
Advises filling the datasheet for maintenance, manufacturer communication, and warranty.
Outlines the manufacturer's warranty terms, duration, limitations, and conditions for voiding it.
States compliance with CE standards and Eco design directives, referencing website for details.
Provides step-by-step instructions for mounting the unit, including access, wall fixation, and alignment.
Details the connection of the condensate drain pipe, noting the included pump.
Provides general guidance and schematics for the Class Unit's electrical connections.
Illustrates the internal components and their arrangement within the Class Unit.
Shows the placement and color coding of temperature sensors within the unit for identification.
Specifies wiring requirements for power supply, heating coil, including voltage, capacity, and protection.
Manages fan airflow, time slots, bypass, heat exchanger, dampers, and heaters for optimal operation.
Details various communication methods for the TAC5 control system, including RC, GRC, MODBUS, and KNX.
Outlines 3-monthly maintenance checks, including alarms, filter clogging, and internal unit cleaning.
Details 12-monthly maintenance tasks, including fan checks, unit airtightness, and bypass cleaning.
Section for recording working modes, airflow settings, pressure alarms, and heating output parameters.
Area to log supply/exhaust airflow and pressure values displayed during unit operation.
General