Need help?Do you have a question about the P1 dx-825 and is the answer not in the manual?
Place the modem near a window for optimal 4G signal reception.
Connect the power adapter to the wall socket and modem; LEDs will light up briefly.
Modem automatically connects to the 4G network; observe LED patterns for status.
Understand LED patterns for signal strength and connection authentication status.
Switch on the WiFi adapter on your laptop to begin the connection process.
Right-click the network icon and select 'View Available Wireless Networks'.
Select the default SSID and enter the WiFi password to connect to the modem's network.
Enter http://10.1.1.254 in your browser to access modem settings.
Connect one end of the Phone Cable (RJ-11) to the modem's Phone Port and the other to the phone.
Once connected, the blue phone LED will light up, indicating service readiness.
Understand LED status and phone line status for service registration and usage.
Press and hold the reset button for 5 seconds, then release to reset the modem.
General| Category | Modem |
|---|---|
| Model | dx-825 |
| Interface | USB |
| Supported Networks | GSM, GPRS, EDGE, UMTS, HSPA |
| Frequency Bands | 850/900/1800/1900 MHz |
| Operating System Compatibility | Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS X, Linux |
To Next Page