EasyManua.ls Logo

P1PE P4100P - Starting Procedure

P1PE P4100P
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
NOTE
This lawnmower is shipped without oil or petrol.
You MUST ensure the correct oil and fuel is used BEFORE use
Oil: Semi-Synthetic SAE 15W40 Engine Oil.
Oil Capacity: 600ml
Fuel: Unleaded Petrol
Fuel Capacity P4000P & P4600SP: 1000ml
Fuel Capacity P5100SPE: 1100ml
4.0 Make sure the blade is free of long grass and the cutting height is set to maximum (1).
4.1 Pump the primer bulb 5 times (2).
4.2 P5100SPE ONLY: Push the choke lever fully forward (1).
4.3 Pull the Operator Presence Control (OPC) lever (2) towards the main handle.
5. STARTING PROCEDURE
COLD RECOIL START ALL MODELS
1
2
1
2

Other manuals for P1PE P4100P