39
7.50 If the belt is damaged or worn, replace immediately.
7.51 Loosen the tension on the drive belt by undoing the lock nut on the drive cable (1 & 2).
7.52 Wind the lock nut and the adjuster nut all the way to the bottom to allow enough free
play to be able to remove the drive belt (3).
7.53 Unhook the belt from the main drive pulley (1).
7.54 Unhook the belt from the rear pulley (2).
7.55 The belt should now be free to remove completely (3).
7.56 To reinstall, reverse the procedure above.
To Next Page
Loading...
