EasyManua.ls Logo

P1PE P5200BC - Operating Instructions Overview; General Operation Safety Guidelines; Cutting Attachment Selection Guide; Trimming Technique and Best Practices

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
7. OPERATING INSTRUCTIONS
WARNING
Always wear the appropriate Personal Protective Equipment (PPE) when using this
machine.
Never lean over the rotating cutting head. Rocks or other debris could be thrown into
your eyes or face and cause serious injury.
WARNING
Keep the cutting attachment guard in place at all times.
CHOOSE AN ATTACHEMENT
6.0
Choose a suitable cutting attachment according to the job.
TRIMMING
6.1
Always remember that the TIP of the line does the cutting.
You will achieve better results by not forcing the line into the cutting area.
Allow the unit to trim at its own pace.
6.2
Hold the unit so the head is off the ground and is tilted about 20 degrees towards the
sweep direction.