29
HELMET
Before transport put the face shield and/or the goggles in standby position and
place the helmet in a PAB protective textile bag.
FACE SHIELDS AND GOGGLES AS SPARE PART
The face shields and goggles shall be stored and transported in their plastic bags
until mounted on the helmet.
DISCARD
The helmet and its parts shall be treated as ordinary non-hazardous industrial
waste according to local regulations.
For further information, please contact PAB Akrapovic.
The minimal expected lifetime of the helmet is ten (10) years, but it strongly
depends on the conditions of use, maintenance and storage of the product. To
ensure a litime as long as possible please follow the instructions, information and
recommendations stated in this user manual.
The lifespan of metal products is not limited.
TRANSPORT
To Next Page
Loading...