PAC L.O.C.PRO LP3-2 User Manual

1
L.O.C.PRO™ LP3-2
Line Output Converter
Before You Start
Replacing your radio? PAC also produces RadioPRO
™
which is a radio replacement solution, with steering wheel
control retention built-in. This greatly expedites the installation of a new radio into your vehicle.
To see if there is a RadioPRO
™
interface for your vehicle, visit www.pac-audio.com and search "Radio PRO".
Installation Instructions
The professional way to integrate
your new amplier.
General Overview
Install It Right with L.O.C. PRO
™
Don’t cheat yourself out of all the performance your new radio or amplier can deliver. Proper audio line level
matching is critical when replacing your vehicle’s factory (OEM) radio or amplier. It can be the difference
between a great sounding system that you enjoy every day and a buggy, noisy mess that drives you crazy.
PAC L.O.C.PRO™ interfaces have been professionally designed for those who want the very best.
The L.O.C.PRO™ LP3-2 can be used for adding ampliers to a system that does not have RCA outputs. Level
matching is achieved using precision stereo gain dials and will enable proper adjustment of audio output of the
radio for optimum system performance. Included in these instructions are the most common applications for the
L.O.C.PRO™ LP3-2.
For specialty applications not covered in this manual, please visit www.pac-audio.com for more comprehensive,
vehicle specic wiring diagrams.
Direct url - www.pac-audio.com/products/locpro
Speaker Level Input to RCA Level Output
Speaker level input to RCA level output is the most commonly used scenario for the LP3-2.
Use this when you need to create RCA level outputs from a source that only has speaker level outputs.
The RCA input connectors on the main harness will not be utilized for this type of installation, we suggest
cutting them off the harness 3 inches from the RCA end so they can be saved and used for a future installation.
After all the connections are made, skip to the level adjustment section of this manual.
Copyright 2013 Pacic Accessory Corporation. Content subject to change without notice.
Front Right Audio Input
+
+
+
+
+ + +
+ +
+ +
+ + +
+
+
+ + + +
+ + + + +
+
+
+
+
+
+ + + + + + +
+ + + + + + + + + + + +
+
+
+
+
+ + +
+ +
+ +
+ + +
+
+
+ + + +
+ + +
+ +
+
+
+
+
+
+ + +
+ + + + + + + + + + + +
Audio Ground Input -
Audio Ground Input -
Front Le Audio Input -
Front Le Output
Front Right Output
(
OPTIONAL
)
(
OPTIONAL
)
Note: If using large RCA connectors that are difcult to insert into housing, unsnap the
L.O.C.PRO™ cover and remove end panel insert around RCA outputs.

PAC L.O.C.PRO LP3-2 Specifications

General

Channels	2
Remote Output	Yes
Model	L.O.C.PRO LP3-2
Type	Line Output Converter
Storage Temperature	-40°C to +85°C
Humidity	5% to 95% non-condensing