Page 2
Compliance and
Regulatory
Markings
The PacBio
®
Sequel System is labeled with the following compliance
and regulatory markings.
Symbol Description
This label assures that the product meets requirements for
all relev
ant EU directives.
This label assures that the product meets Chinese RoHS
regulatory requirements.
This label assures that the product is compliant with safety
standards and has been tested and certified by a third
party organization.
Korea compliance. Equipment for professional use (Class
A). The seller or end user of the device with EMC
requirements should use the equipment with caution ad
only under professional environments.
The RCM label indicates the product is compliant with the
applicable technical standards for Electromagnetic
Compatibility (EMC). The RCM mark is a certification
trademark registered to ACMA (for Australia and New
Zealand).
Symbols on
Instrument
The following are symbols or labels that may be affixed to the instru-
ment.
Symbol Description
Designates the On position of the main power switch
Designates the Off position of the main power switch
Designates a standby switch by which the instrument is
switched on to the Standby condition. Hazardous voltage
may be present if this switch is on standby
Designates a terminal that may be connected to the signal
ground reference of another instrument. This is not a
protected ground terminal
To Next Page
Loading...