TINY-2/MICRO-2 Technical Ref., 2. Ed 1989
- 24 -
APPENDICES
Node Interconnection Cables
These diagrams are intended for use with NET/ROM, ROSE and other network EPROMs. If these
diagrams do not agree with those suggested by the network software manual, use those provided
by the software manual, modified as necessary for the TINY-2/MICRO-2 9 pin connector.
Dual TINY-2/MICRO-2 Node
Pin # Unit 1 Pin # Unit 2
2 –––––––––––––––– 3
3 –––––––––––––––– 2
7 –––––––––––––––– 8
8 –––––––––––––––– 7
5 & 9 ––––––––––––– 5 & 9
Note; Lines 7 and 8 are optional.
Dual Node, TINY-2/MICRO-2 and TNC-2(00)
Pin # Unit 1 Pin # Unit 2
2 –––––––––––––––– 2
3 –––––––––––––––– 3
7 –––––––––––––––– 5
8 –––––––––––––––– 20
5 & 9 ––––––––––––– 10 & 23
Note: Lines 7 & 8 to 5 & 20 are optional.
Triple Node
Follow the cable assembly instructions in the NET/ROM manual substituting pin numbers
according to this table.
TINY-2/MICRO-2 TNC-2(00)
2 –––––––––––––––– 3
3 –––––––––––––––– 2
7 –––––––––––––––– 1 & 7
8 –––––––––––––––– 5
9 –––––––––––––––– 23
Triple (and larger) node cable diode matrices may be easily constructed using the "TNC Octopus"
diode matrix board by John Painter. The Octopus is available from PacComm.
To Next Page
Loading...
Need help?
General