- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
MEGA-T300 Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
2.0 Unpacking, Shipping and Installation
2.1 Unpacking
Unit is delivered in a crate. Unpack and check for completeness of
parts.
Measures WxHxD: Approx. 36” x 36” x 36”
Weight: Approximately 375 lbs.
2.2 Shipping
When moving crate, lift from bottom. To move MEGA-T300 use
support bars provided with the machine.
The MEGA-T300 is constructed of sensitive electronic and
mechanical components. Do not drop.
! Caution: Heavy equipment. Take care to avoid bodily injury.
6
(Installation continued on next page)
To Next Page
Loading...