- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
MEGA-T300 Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
1.4 Features
Powerful motor
The MEGA-T300 is equipped with a
powerful belt drive motor. In addition, the
motor has an inductive brake for faster
stopping of the blade.
Manual feed and table feed cutting
The MEGA-T300 is an easy-to-use
manual cutter with simple controls.
Cutting can be accomplished with either a
wheel feed or table feed.
The MEGA-T300 also has a removable
side port panel for sectioning longer
samples.
5
East to grip cutting
handle
Side panel for
long sample
access
Table feed for
increasing
cutting
capacity
Safety lock-out
for protecting
user against
moving blade
Blade locking
lever
Viewing
window
Easy to
use
control
panel
Emergency
stop button
To Next Page
Loading...