- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
MEGA-T300 Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEG-TB
Tool box
MEG-25HW
2.5 mm hex wrench
MEG-10HW
M10 hex wrench
M3-WCH
MEGA T300 Wrenches (30/32 mm)
Part no. Descripon Images
Tools
Part no. Descripon Images
Vice Components
QC-REPAIR
Vice repair kit MEGA-T400 (kit include cam
shaft and bar, spring and adjustment set screw for
one vise)
MIG-01
Vertical clamping vise with 45 mm arm (1.8-inch)
and shoe
MG-15-01
Vertical clamping vise with 75 mm arm (3-inch)
and shoe for MEGA-T400
39
To Next Page
Loading...