Pace 500.3 User Manual

PACE 500.3
QUICK START GUIDE
GETTING STARTED
Press and hold the button on the handlebar control for
about 3 seconds to power up the system. While the bike and
display are powered on, press and hold for 3 seconds to
turn your ebike off.
The Pace 500.3 ebike offers pedal assist (PAS). When using
pedal assist, an electric motor supplements the rider’s own
effort. To use the pedal assist, simply start pedaling, then tap
the “+” or “-” symbols to increase or decrease the amount of
pedal assist. Pedal assist will engage at speeds up to 28 MPH.
The Pace 500.3 ebike is equipped with a throttle, which is
mounted near the rider’s left thumb, to propel the bike
without pedaling. The throttle can propel you at speeds up to
20 MPH. The throttle is "on-demand" meaning you can
engage the throttle at any time, including from a complete
stop while in PAS eco through turbo. However, we strongly
encourage you to pedal first before engaging the throttle.
The motor stops when you stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to
re-engage the motor.
BATTERY AND CHARGING
We recommend charging the battery off the bike indoors, in
moderate temperature conditions. To charge the battery,
plug the charger into the charging port and then connect
the charger to a wall outlet. The LED indicator light will be
red when charging and will turn green when charging is
complete.
MAINTENANCE & SERVICE
Properly maintaining your Pace 500.3 ensures its longevity
and smooth operation. Here is our recommended
ebike maintenance guide and schedule. Before assembling
your bike, please watch the “How To Assemble” video. If you
have questions during the assembly process, please contact
Aventon Support.
SAFETY
You should wear an approved bicycle helmet every time
you ride a bicycle, regardless of the legal requirement to do
so. Additionally, some jurisdictions require helmet use when
riding Class III ebikes like the Pace 500.3. You should comply
with local law when riding your Aventon bicycle. Check out
our Safety section for more information.
PACE 500.3 QUICK START GUIDE

Pace 500.3 Specifications

General

Brand	Pace
Model	500.3
Category	Control Unit
Language	English

Summary

Getting Started

Powering On and Off

How to turn the ebike system on and off using the handlebar control.

Pedal Assist System (PAS)

Using electric motor assistance while pedaling, speed limits.

Throttle Operation

Using the throttle for propulsion without pedaling, speed limits.

Battery and Charging

Charging Procedure

Recommended indoor charging, LED indicators for charging status.

Maintenance and Service

Assembly and Support

Watch assembly video and contact support for questions.

Safety Guidelines

Helmet Use and Regulations

Importance of wearing helmets and complying with local laws.

Display and Controls Overview

Home Page Elements

Key display indicators like speed, battery, power bar, and assistant level.

Riding Data Pages

Switching between different data views like total time and average speed.

Trip A/B Pages

Accessing and exiting trip data logs for tracking rides.

Functional Controls

Light Control

Turning the bike's lights on and off using a long press.

Assistant Level Adjustment

Increasing or decreasing pedal assist levels using +/- buttons.

Pedestrian Mode

Activating walk assist mode by holding the '-' button.

Main Menu Navigation

Accessing and Exiting Menu

Entering the main menu via button combination and exiting.

Menu Options

Navigating and selecting options like 'Set Unit', 'Speed Limit', 'System Info'.

Aventon App Connectivity

Connecting to the App

Linking the ebike to the Aventon app via QR code.