To Next PageTo Next Page
Need help?Do you have a question about the Pacific energy A Series and is the answer not in the manual?
General| Brand | Pacific energy |
|---|---|
| Model | A Series |
| Category | Indoor Fireplace |
| Language | English |
Critical safety warning concerning proper installation to prevent fires.
Warnings about hot surfaces, glass, and protecting children from burns.
Information on the product's rating label and certifications.
Detailed physical dimensions for installation and reference.
Required minimum distances from the unit to surrounding flammable materials.
Specific clearance requirements for installation in masonry fireplaces.
Guidelines for hearth extensions and ember protection.
Requirements for full flue liner and direct flue connection.
Guidelines for installing the insert into a factory-built fireplace.
Methods for providing necessary combustion air to the unit.
Steps for assembling and attaching the fireplace surround.
Information on creosote buildup, chimney fires, and prevention.
Steps to take during and after a chimney fire, and prevention methods.
Guidance on suitable wood types and materials that must not be burned.
Method to test wood for proper dryness before burning.
Instructions for starting the fire and curing the new paint finish.
Procedures for regular operation, setting controls, and adding fuel.
How to restart the unit and avoid damaging overfiring conditions.
Formula provided to calculate the appliance's heat output.
Understanding draft, removing ash, and safe ash disposal practices.
Detailed steps for maintaining the fireplace insert's components.
Instructions for inspecting, cleaning, and replacing the door gasket and glass.
Guidance on blower cleaning and baffle removal for inspection.
Step-by-step instructions for replacing the blower assembly.
Procedure to change the direction of the power cord exit.
Schedule and items for regular checks to ensure proper functioning.
Specific inspection tasks for weekly and monthly intervals.
Checks for the chimney system components and the blower unit.
Solutions for common problems like creosote, dirty glass, and burning issues.
Solutions for excessive creosote, dirty glass, and poor burning performance.
Information about the firebricks used in the Neo 1.6 Insert.
Step-by-step guide for installing the firebricks inside the firebox.
List of available replacement parts with their corresponding part numbers.
Details on the limited lifetime warranty, coverage, and exclusions.
Scope of warranty, including covered parts and excluded items.
