EasyManua.ls Logo

Pacific energy VISTA CLASSIC - User Manual

Pacific energy VISTA CLASSIC
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION
AND OPERATING
INSTRUCTIONS
201213 -20 VISTA and CLASSIC-C 5055.3
Models
Paci c VISTA
VISTA CLASSIC
SERIES - C
SAFETY NOTICE
If this stove is not properly installed, a
house  re may result. For your safety,
follow the installation instructions. Contact
local building or fire officials about
restrictions and installation inspection
requirements in your area.
IMPORTANT:
THESE INSTRUCTIONS ARE TO
REMAIN WITH THE HOMEOWNER
TESTED and LISTED to CAN/ULC S627
and UL 1482
Meets the Environmental Protection
Agency’s July 1990 Particulate
Emission Standards
SERIAL #

Other manuals for Pacific energy VISTA CLASSIC

Question and Answer IconNeed help?

Do you have a question about the Pacific energy VISTA CLASSIC and is the answer not in the manual?

Summary

Safety Notice

Installation and Operating Instructions

Key steps for safe installation and operation of the Pacific Energy stove.

Safety and Maintenance

Maintenance Checks

Regular checks to ensure the stove and chimney system are in good condition.

Creosote

Formation and Need for Removal

Explains creosote formation and the importance of its periodic removal.

Chimney Fires

Details the dangers of chimney fires and how to respond.

Maintenance Checks

Blower Maintenance

Instructions for cleaning the blower to ensure optimal performance and longevity.

Chimney Fires

In Case of a Chimney Fire

Step-by-step guide on what to do during a chimney fire for safety.

Avoiding a Chimney Fire

Practical advice on preventing chimney fires through proper operation.

Assembly

Crate Removal

Steps to safely remove the stove from its shipping crate.

Pedestal Kit Installation

Instructions for attaching the pedestal base to the stove unit.

Leg Kit Installation

Instructions for attaching the leg kit to the stove unit.

Optional Ash Cleanout System

Steps for installing the optional ash cleanout system.

Mobile Home Installation

Clearances for Mobile Homes

Specifies minimum clearances required for installing the stove in a mobile home.

Chimney and Chimney Connector

Guidelines for connecting the stove to the chimney system in mobile homes.

Mobile Home Installation Procedure

Step-by-step process for installing the stove in a mobile home environment.

Residential Installation

Clearances and Chimney Requirements

Specifications for clearances and chimney setup in residential installations.

Connector Types and Installation

Details on using single-wall connectors and general installation procedures.

Floor Protector Requirements

Combustion Air Supply

Operation

Wood Selection and Preparation

Guidance on choosing and preparing wood for efficient and safe burning.

Lighting a Fire

Instructions on how to properly start a fire in the stove.

Normal Operation

Details on setting controls and managing the fire for optimal performance.

Operation

Restarting After Extended Burns

Steps to safely restart the stove after it has been out for a period.

Draft, Ash Removal, and Disposal

Managing draft, removing ashes, and safe disposal procedures.

Baffle Removal

Baffle Removal Procedure

Instructions for safely removing the baffle for cleaning or inspection.

Optional Blower

Blower Operation

How to operate the optional blower for improved heat distribution.

Optional Outside Air Adaptor

Installation and use of the adaptor for outside combustion air supply.

Appendix A

Troubleshooting

Common problems and their solutions for the stove.

Replacement Parts - Pacific Vista

Replacement Parts - Vista Classic

Understanding Your Pacific Energy Stove

Operating Tips

Key advice for operating the stove efficiently and safely.

Firebrick Installation Instructions

Label Information

Pacific energy VISTA CLASSIC Specifications

General IconGeneral
TypeWood stove
Fuel TypeWood
Maximum Log Length18 inches
EPA CertifiedYes
Burn TimeUp to 8 hours
Flue Size6 inches
Emissions2.5 g/hr

Related product manuals