EasyManua.ls Logo

Pacific hydrostar 99741 User Manual

Pacific hydrostar 99741
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1600 PSI
PRESSURE WASHER
99741
SET UP AND OPERATING INSTRUCTIONS
Holster (10) not shown.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Question and Answer IconNeed help?

Do you have a question about the Pacific hydrostar 99741 and is the answer not in the manual?

Pacific hydrostar 99741 Specifications

General IconGeneral
BrandPacific hydrostar
Model99741
CategoryPressure Washer
LanguageEnglish

Summary

IMPORTANT SAFETY INFORMATION

General Pressure Washer Safety Warnings

Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.

Work Area and Electrical Safety

Maintain a clean work area and follow electrical safety precautions to prevent shock.

Personal Safety Precautions

Use personal protective equipment and follow safe practices to prevent injury during operation.

Pressure Washer Use and Care

Specific Safety Warnings for Use

Critical safety warnings related to injection risks, product suitability, water conditions, and electrical hazards.

Vibration Safety

Grounding and Symbology

ASSEMBLY

Important Safety Information Before Assembly

Crucial safety warnings and procedures to follow before beginning the assembly process.

CONTROLS AND SETUP

OPERATION

INSPECTION, MAINTENANCE, AND CLEANING

TROUBLESHOOTING

Unit Stops Suddenly or Won't Restart

Steps to diagnose and resolve issues with the pressure washer stopping or failing to start.

Pressure Build-up and Leakage Issues

Troubleshooting for problems with pressure not building or water leaking from the housing.

Related product manuals